Unborn Dreams

Unborn Dreams 5.jpg
Unborn Dreams 4.jpg
Unborn Dreams 2.jpg
Unborn Dreams 1.jpg
Unborn Dreams 3.jpg
Unborn Dreams 5.jpg
Unborn Dreams 4.jpg
Unborn Dreams 2.jpg
Unborn Dreams 1.jpg
Unborn Dreams 3.jpg

Unborn Dreams

from 37.00

I handcrafted this design by, first, cutting two identical disc shapes out of a copper sheet of thick metal. I hand-polished the discs and then drilled a hole through them to attach earwires to later. I, evenly, distributed fine powdered glass enamel, in white, on the discs and carefully torch-fired it in order to fuse both materials together. I, then, repeated this same procedure, but this time, I carefully applied red enamel only around the rim of the earwire hole. I handmade a pair of earwires, which I tumbled for a substantial amount of time, until the perfect amount of strength and shine was reached. Once donewith the tumbling, I attached them to the discs. Finally, I hand-polished the discs a second time, to bring out the beautiful shine of the copper, before attaching a handmade pair of earwires to them, which I have, cleverly, designed so that earbacks are unnecessary.


DROP:
*~ hand-cut copper disc ~*
{ given the nature of this design, size, and/or shape may (or may not) vary, to some degree, from the pictured earrings }


COLOR:
*~ white and red ~*
{ backside is counter-enameled (dark-bluish) in order to balance the stress on the metal, therefore, preventing the glass from cracking }


EARWIRES:
*~ handcrafted ~*


LENGTH:
*~ 1¼" ( 19mm disc ) ~*

In order to show their maximum detail, all earrings are photographed at close-up range. Therefore, they may seem larger than they actually are. Please refer to item description above for size details.

Earwire Metal:
Quantity:
Add To Cart